A practical reference on low-binding tubes: what it is, how it behaves, what the literature reports, and where the honest uncertainties sit.
Reviewed 2026-04-25. Anything still debated is marked as such rather than presented as settled.
Reconstitution begins with selecting a solvent that dissolves the peptide without causing degradation. Water or aqueous buffer is suitable for many hydrophilic sequences, while hydrophobic peptides may require a small amount of organic solvent such as acetonitrile or dimethyl sulfoxide before dilution. The solvent is added to the vial rather than the powder being scraped out, and the mixture is swirled or inverted gently to avoid foaming. Complete dissolution should be confirmed visually, and insoluble material may indicate aggregation or impurities. Because solvent tolerance varies, published solubility information or a small test dissolution can guide handling.
Aseptic technique reduces microbial and particulate contamination when a peptide solution will be used in cell culture or other sensitive applications. Work in a clean area, use sterile containers and filtered tips, and avoid touching vial interiors. Preparing aliquots immediately after dissolution limits repeated temperature cycling, which is a common cause of aggregation and activity loss. Low-binding plastic tubes are preferred for peptides that adsorb to surfaces, especially hydrophobic or positively charged sequences. Labels should record identity, solvent, concentration, and preparation date so that later use can be traced.
Shipping and short-term transfer require attention to temperature control and physical stability. Frozen solutions are commonly sent on dry ice, while lyophilized powders may travel with gel packs or insulated packaging. Thawing should be done slowly on ice or in a refrigerator, not by vigorous heating, and the solution should be mixed gently before use. Temperature loggers can document excursions during transit, but their presence does not prove that a peptide remained stable. Analytical checks such as chromatography or mass spectrometry can verify identity and purity after storage or shipping.
Peptides are short chains of amino acids linked by amide bonds. Their stability depends on sequence, length, and the chemical environment. Common degradation routes include hydrolysis of the peptide backbone, oxidation of methionine or cysteine residues, deamidation of asparagine or glutamine, and aggregation through hydrophobic or electrostatic interactions. These processes can alter mass, charge, or biological activity, so storage conditions aim to slow them. The relative importance of each route varies widely among peptides.
Water is a central factor in peptide degradation because it enables hydrolysis and mobilizes reactive species. Lyophilized or dry powders typically remain stable for longer than solutions when kept cool and dry. Oxygen can drive oxidation, particularly for sulfur-containing residues, while light can catalyze side-chain damage. Buffer choice and pH influence charge state and can accelerate or slow deamidation and aggregation. Freeze-thaw cycles may concentrate solutes or promote ice-induced aggregation, so minimizing such cycles is a common handling goal.
| Property | Value | Notes |
|---|---|---|
| Physical form | Lyophilized powder or frozen solution | Powder typically more stable for long-term storage; solutions require colder conditions. |
| Recommended reconstitution solvent | Water, buffer, or water-miscible organic solvent | Matches peptide hydrophobicity; test small portion if unknown. |
| Typical working aliquot size | Single-use volumes in low-binding tubes | Reduces repeated warming and cooling and contamination risk. |
| Short-term shipping condition | Dry ice for frozen solutions; gel packs for powders | Insulation and temperature logging help document transit. |
| Common purity check | Reverse-phase HPLC with UV detection | Often paired with mass spectrometry for identity confirmation. |
Peptides are short chains of amino acids whose physical and chemical stability depends on sequence, length, conformation, and the surrounding matrix. In the solid state, lyophilized powders are generally more stable than solutions because low water activity slows hydrolysis and oxidation. Residual moisture, oxygen, trace metals, and light can still promote degradation over time. Storage recommendations therefore balance temperature, humidity, and container integrity rather than relying on a single condition. The optimal condition for a given peptide is often determined empirically because no universal rule covers every sequence.
In aqueous solution, peptides are vulnerable to hydrolysis, oxidation, deamidation, and aggregation, with rates influenced by pH, temperature, buffer composition, and ionic strength. Acidic or neutral pH ranges often slow deamidation, while extreme pH can accelerate peptide bond cleavage. Dissolved oxygen and redox-active metal ions contribute to oxidation of methionine, cysteine, and tryptophan residues. Aggregation may be driven by hydrophobic interactions or by interfaces such as air-liquid and container surfaces. Because these pathways interact, solution storage usually requires tighter control than storage of dried material.
Reconstitution is often performed with sterile water, buffer, or a water-miscible organic solvent, depending on solubility. The solvent should be added gently along the vial wall, and the solution mixed by gentle swirling rather than vigorous vortexing, which can cause foaming and surface denaturation. Some sequences require a small amount of base or acid to dissolve, followed by pH adjustment. Preparing a concentrated stock solution can simplify later dilution, but the stock itself may have limited stability. Records of solvent, concentration, and date support reproducibility.
After reconstitution, dividing the solution into single-use aliquots limits multiple warming and cooling events and reduces contamination risk. Low-binding polypropylene tubes are often preferred because peptides can adsorb to glass or untreated plastic surfaces. Filling headspace with nitrogen or argon can slow oxidation, and amber or foil-wrapped containers reduce photodegradation. Each aliquot should be labeled with peptide identity, concentration, date, and storage conditions. Frozen aliquots should be thawed quickly and kept on ice until use.
Peptides are short amino acid polymers whose stability depends on sequence, length, and chemical modifications. In dry form, most peptides are relatively stable because low water activity slows hydrolysis and other degradation. Residual moisture, oxygen, and light can still promote oxidation, deamidation, or aggregation over time. Storage recommendations therefore usually combine low temperature, desiccation, and protection from light. Because each peptide has distinct properties, no single condition fits every sequence.
Temperature selection balances degradation rate against physical changes. Many lyophilized peptides are stored at -20 °C, while some modified or longer sequences require -80 °C for extended periods. Aqueous stock solutions are less stable and are often kept at -20 °C or below in single-use aliquots. Repeated freeze-thaw cycles can cause aggregation, precipitation, or loss of activity, so aliquoting before freezing reduces that risk. Frost-free freezers cycle above freezing and may be unsuitable for long-term peptide storage.
Container and environment choices matter. Peptides may adsorb to glass, plastic, or filter membranes, especially at low concentrations. Low-binding tubes and inert containers reduce loss. Moisture barriers include sealed bags with desiccant, and light protection uses amber vials or opaque wraps. Inert gas blankets can limit oxidation for sequences containing methionine, cysteine, or tryptophan. Buffers and pH also affect solution stability; extremes of pH accelerate hydrolysis and deamidation. These practices apply to research and manufacturing settings, not to any specific clinical use.
Alfred Zack Gilman (February 5, 1908 – January 13, 1984) was an American pharmacologist best known for pioneering early chemotherapy techniques using nitrogen mustard with his colleague, Louis S. Goodman. The pair also published the classic textbook The Pharmacological Basis of Therapeutics in 1941, and Gilman served as an editor for its first six editions. Gilman served on the faculties of the Yale School of Medicine, the Columbia College of Physicians and Surgeons, and the Albert Einstein College of Medicine, where he founded the Department of Pharmacology. He was a member of U.S. National Academy of Sciences.
As mentioned above, G-proteins may terminate their own activation due to their intrinsic GTP→GDP hydrolysis capability. However, this reaction proceeds at a slow rate (≈0.02 times/sec) and, thus, it would take around 50 seconds for any single G-protein to deactivate if other factors did not come into play. Indeed, there are around 30 isoforms of RGS proteins that, when bound to Gα through their GAP domain, accelerate the hydrolysis rate to ≈30 times/sec. This 1500-fold increase in rate allows for the cell to respond to external signals with high speed, as well as spatial resolution due to limited amount of second messenger that can be generated and limited distance a G-protein can diffuse in 0.03 seconds. For the most part, the RGS proteins are promiscuous in their ability to deactivate G-proteins, while which RGS is involved in a given signaling pathway seems more determined by the tissue and GPCR involved than anything else. In addition, RGS proteins have the additional function of increasing the rate of GTP-GDP exchange at GPCRs, (i.e., as a sort of co-GEF) further contributing to the time resolution of GPCR signaling. In addition, the GPCR may be desensitized itself. This can occur as:
The Society holds an annual conference in late May or early June as well as topical conferences (at Asilomar State Beach in California and Sanibel Island, Florida) and a fall workshop, which is also focused on a single topic. Conferences on Mass Spectrometry and Allied Topics have been held yearly since 1953. International Mass Spectrometry Foundation List of female mass spectrometrists ASMS website
Sources: en.wikipedia.org
In physics and chemistry, binding energy is the smallest amount of energy required to remove a particle from a system of particles or to disassemble a system of particles into individual parts. In the former meaning the term is predominantly used in condensed matter physics, atomic physics, and chemistry, whereas in nuclear physics the term separation energy is used. A bound system is typically at a lower energy level than its unbound constituents. According to relativity theory, a ΔE decrease in the total energy of a system is accompanied by a decrease Δm in the total mass, where Δmc2 = ΔE. There are several types of binding energy, each operating over a different distance and energy scale. The smaller the size of a bound system, the higher its associated binding energy.
Nanoghosts are nanosized vesicles containing a chosen drug delivery payload manufactured from extracted leukocyte membranes with the cell cytoplasm content removed. The use of biological membranes serves to mask the particles from the immune system to reduce the likelihood of an immunogenic response, as well as to extend circulation of the particles in the blood. They are produced by homogenizing the cells to remove the cytosol, and then sonicating the empty cell membranes to create nanoghosts between 100 and 200 nm in diameter. Membranes used to make nanoghosts harvested form red blood cells have been shown to circulate for about 120 days and avoid phagocytotic cells. Neutrophil based nanoghosts retain the chemotaxis capacity of neutrophils to sites of inflammation, which encourages tumor targeting. NK based nanoghosts exhibit metastatic cancer targeting behavior. Monocyte based nanoghosts are effective at infiltrating the tumor microenvironment. Mesenchymal stem cell derived nanoghosts exhibit cancer targeting properties.
In some neurodegenerative diseases, alpha-synuclein produces insoluble inclusion bodies. These diseases, known as synucleinopathies, are connected with either higher levels of normal alpha-synuclein or its mutant variants. The normal physiological role of Snca, however, has not yet been thoroughly explained. In fact, physiological Snca has been demonstrated to have a neuroprotective impact by inhibiting apoptosis induced by several types of apoptotic stimuli, or by regulating the expression of proteins involved in apoptotic pathways. Recently it has been demonstrated that up-regulation of alpha-synuclein in the dentate gyrus (a neurogenic niche where new neurons are generated throughout life) activates stem cells, in a model of premature neural aging. This model shows reduced expression of alpha-synuclein and reduced proliferation of stem cells, as is physiologically observed during aging. Exogenous alpha-synuclein in the dentate gyrus is able to rescue this defect. Moreover, alpha-synuclein also boosts the proliferation of dentate gyrus progenitor neural cells in wild-type young mice. Thus, alpha-synuclein represents an effector for neural stem and progenitor cell activation. Similarly, alpha-synuclein has been found to be required to maintain stem cells of the subventricular zone another neurogenic niche, in a cycling state.
Sources: en.wikipedia.org
Amino acid N-carboxyanhydrides, also called Leuchs' anhydrides, are a family of heterocyclic organic compounds derived from amino acids. They are white, moisture-reactive solids. They have been evaluated for applications the field of biomaterials. NCAs are typically prepared by phosgenation of amino acids: They were first synthesized by Hermann Leuchs by heating an N-ethoxycarbonyl or N-methoxycarbonyl amino acid chloride in a vacuum at 50-70 °C: A moisture-tolerant route to unprotected NCAs employs epoxides as scavengers of hydrogen chloride. This synthesis of NCAs is sometimes called the Leuchs method. The relatively high temperatures necessary for this cyclization results in the decomposition of several NCAs. Of several improvements, one notable procedure involves treating an unprotected amino acid with phosgene or its trimer. NCAs are prone to hydrolysis to the parent amino acid: RCHNHC(O)OC(O) + H2O → H2NCH(R)CO2H + CO2 Some derivatives however tolerate water briefly. NCAs convert to homopolypeptides ( [N(H)CH(R)CO)]n) through ring-opening polymerization:
isoform.io is a database of AlphaFold2-generated structures of proposed splice isoforms in the human genome. It includes information from 237,275 human transcripts. It has been used to detect errors in the mRNA predictions for a handful of genes. AlphaFold has shown certain limitations. AlphaFold DB provides models of individual protein chains (monomers), rather than their biologically relevant complexes. Many protein regions are predicted with low confidence score, including the intrinsically disordered protein regions. Alphafold-2 was validated for predicting effects of point mutations on structure and free energy, with a partial success.
Arginylglycylaspartic acid (RGD) is the most common peptide motif responsible for cell adhesion to the extracellular matrix (ECM), found in species ranging from Drosophila to humans. Cell adhesion proteins called integrins recognize and bind to this sequence, which is found within many matrix proteins, including fibronectin, fibrinogen, vitronectin, osteopontin, and several other adhesive extracellular matrix proteins. The discovery of RGD and elucidation of how RGD binds to integrins has led to the development of a number of drugs and diagnostics, while the peptide itself is used ubiquitously in bioengineering. Depending on the application and the integrin targeted, RGD can be chemically modified or replaced by a similar peptide which promotes cell adhesion.
25499Es + 4820Ca → 302119Uue* → no atoms It is highly unlikely that this reaction will be able to create any atoms of ununennium in the near future, given the extremely difficult task of making sufficient amounts of einsteinium-254, which is favoured for production of ultraheavy elements because of its large mass, relatively long half-life of 270 days, and availability in significant amounts of several micrograms, to make a large enough target to increase the sensitivity of the experiment to the required level; einsteinium has not been found in nature and has only been produced in laboratories, and in quantities smaller than those needed for effective synthesis of superheavy elements. However, given that ununennium is only the first period 8 element on the extended periodic table, it may well be discovered in the near future through other reactions, and indeed an attempt to synthesise it is currently ongoing in Japan. Currently, none of the period 8 elements has been discovered yet, and it is also possible, due to drip instabilities, that only the lower period 8 elements, up to around element 128, are physically possible. No attempts at synthesis have been made for any heavier alkali metals: due to their extremely high atomic number, they would require new, more powerful methods and technology to make.
Sources: en.wikipedia.org
Multiple freezing and thawing events can cause aggregation, precipitation, or loss of soluble peptide. Dividing a solution into single-use aliquots before freezing reduces this risk. If multiple cycles are unavoidable, stability should be checked after thawing.
Low-binding polypropylene tubes are often used because some peptides adsorb to glass or standard plastic. The choice depends on peptide hydrophobicity and charge. Containers should be clean, sterile when needed, and compatible with the solvent.
Reverse-phase chromatography can assess purity and retention time, while mass spectrometry confirms molecular mass. These methods can detect degradation products and sequence-related impurities. Results are compared with a reference sample or initial analysis.
Peptide degradation can arise from hydrolysis, oxidation, deamidation, and aggregation. The dominant route depends on the peptide sequence and the storage environment. Temperature, moisture, oxygen, light, and pH all influence the rate.